BERICAP presents innovative products on FachPack (Hall:6, Stand: 6-418)

2015.08.10
BERICAP will be among the exhibitors also on this year's FachPack trade fair in Nuremberg.

 
The world-wide operating manufacturer of closures BERICAP will present its plastic closures for the markets of automobile, chemistry, pharmacology, agro-chemistry as well as food in hall 6, stand 6-418.
You need to think innovatively so as to be able to cope with the higher and higher demands on packages and in particular on the sealing breech, which, depending on the field of application, shall not only close and seal the container, but also protect the content against product piracy and at the same time satisfy the high technical demands requested by the government and the authorities.


Further developments BERICAP DIN-closures
In the years past, BERICAP has worked intensively on the successful development of a DIN closure family for plastic canisters. With the standard sizes DIN 42, DIN 45, DIN 51/55 and DIN 60 BERICAP in the meantime covers more than 80 % of the closure sizes used in the canister field.
The entire new DIN closure range is approved for UN-hazardous substance in connection with different canister types and/or canister suppliers.
In order to warrant product safety and quality, all closures are assembled on fully automatic and process-controlled assembly machines of the latest state of technique.
All sizes, also the childproof versions for the sizes DIN 45 and DIN 60, can be custom-made and additionally be equipped with a vent diaphragm and/or with an 'ANTI-Glug-System', which provides for steady pouring. 
 
DIN closure SK 42/21 SFB in two variants
The SK 42/21 SFB is a supplement to the product range of BERICAP DIN closures.
This closure is equipped with a new-type, slitted strip and is available in two versions. The SK 42/21 SFB Mk has a bore-seal-system and is suitable for light canisters and containers without UN-hazardous good approval. The SK 42/21 SFB MDS is equipped with a foamed PE-seal – for containers with the relevant UN-approval.
The SK 42/21 SFB is used mainly for containers in the automotive field, for windscreen cleaners / frost protection, for professional cleaning agents, in the field of health and in the food industry.
It is a special advantage that the TE-strip, which remains on the canister after turning off of the cap, cannot e.g. drop into the engine compartment while filling the container of the windscreen washer.


 
Illustration: SK 42/21 SFB MDS – with foamed PE-seal, for containers with UN-approval


 
Illustration: SK 42/21 SFB MK– Bore-Seal-System for light canisters



Ventilation valve - BV 21/24 MAB MDR enables for better and cleaner charging
As a successful partner of the chemical industry, BERICAP has continuously implemented its research and development for satisfying the higher demands of its clients and has found adequate solutions.
In doing so, BERICAP developed, upon customer's request, an ANTI-GLUG System for all commercial canisters. This system guarantees a "guggle-free", well-dosed and well-targeted pouring out.
The existing series is complemented by the ventilation valve BV 21/24 MAB. This ventilation system was developed for containers with UN-approval and is employed mainly in the field of agro-chemistry, chemistry and in the lubricating oils industry and again with an improved pour-out behaviour.


 
Illustration: Ventilation system for safe charging: BV 21/24 MAB MDR

Protection against product piracy
Closure for the agro-chemical industry

Product piracy along with product forgery are a sensible and momentous problem for chemical articles mainly in the field of agriculture.
In order to protect fills against falsification and manipulation, all closures are equipped with a folded and slitted guarantee strip, which is extremely difficult to manipulate and shows clearly evident tears when opening the closure.
Other protective measures are custom-made closure designs, possibly complemented with an additional safety label, which connects the guarantee strip with the closure, or also the use of laser technology, which enables for, e.g. to laser the company name over the safety strip and the closure, also on uneven surfaces.
BERICAP will present appropriate closure solutions on the FachPack.



Illustration: Protection against manipulation: safety label over the guarantee strip.



BERICAP Closures with Side Laser Printing Application for Chemicals articles
Product piracy and product forgery are very real and considerable problems for chemical articles in the automotive field as well. BERICAP has developed a number of tools to protect against manipulation.
Recently or a customer BERICAP developed a 42mm closure meeting its design requirements and offered a newly developed side laser printing application that imposes the logo on the side of the closure.
The laser mark is printed across the tamper band. The tamper band breaks on first opening and practically cuts the logo – a visible sign for the consumer that the bottle has been opened.
Over the last couple of years BERICAP has developed various closure systems that help to protect its customers’ high-value products from product piracy.


 
Lightweight neck for edible oil on the rise
It was a good 5 years ago when BERICAP first brought the PET 26/21 bottle neck onto the market.
This reduced bottle neck size allowed a weight saving of as much as 1.37 grams compared with the PET 29/21 then dominant on the market, enabling BERICAP to make a major contribution to preserving natural resources and improving its carbon footprint.
BERICAP offers all standard closure variants for the PET 26/21 bottle neck, from a one-part closure through the two-part version to a variety of hinged closure variants.
All closures can be configured with a top embossment. The higher closures allow brand individualisation through side printing.
BERICAP sells more than 1 billion closures for the PET 26/21 bottle neck every year – and the trend is on the rise


With new and further developments it is possible to use low-cost beverage PET-bottles for edible oil
Based on its long-term experience with closures for filling into PET, BERICAP has directed the development to lighter closures, in particular in connection with a bottleneck reduced in weight and developed a closure series for cooking/salad oil, which includes a one-part and a two-part version with different equipment features for the bottleneck diameters of 26 and 29 mm.
However, the 26/21 or the 29/21 neck is not available in all countries and thus must be imported at high costs; or: the filling companies find a universal, but low-cost PET-pre-form with standardized neck for their product portfolio.
Due to the multitude of suppliers, standardized PET-pre-forms such as e.g. used in the beverage industry, can be purchased at lower price than special oil bottles.
The bottleneck PCO 1881, which by now is being used in billions by the beverage industry all over the world, with only 3.82 g in this context is a good value alternative. So BERICAP with its new EV 28/26 has developed a press-on closure, which is suitable on a standardized pre-form both for cooking/salad oil and for sauces and syrups.
The EV 28/26 is available with different features: as standard screw-closure with special anti-drip pour-out, with and without flow regulator.
Other closures for standardized necks are in the trial phase.


 
Illustration: BERICAP new development  EV 28/26 for PCO 1881 neck

Lightweight neck for edible oil on the rise
It was a good 5 years ago when BERICAP first brought the PET 26/21 bottle neck onto the market.
This reduced bottle neck size allowed a weight saving of as much as 1.37 grams compared with the PET 29/21 then dominant on the market, enabling BERICAP to make a major contribution to preserving natural resources and improving its carbon footprint.
BERICAP offers all standard closure variants for the PET 26/21 bottle neck, from a one-part closure through the two-part version to a variety of hinged closure variants.
All closures can be configured with a top embossment. The higher closures allow brand individualisation through side printing.
BERICAP sells more than 1 billion closures for the PET 26/21 bottle neck every year – and the trend is on the rise. 


Dosing valve BericapValve
The speciality of the BERICAPValve is the use of TPE material. This material has the advantage, that – other than the commercial silicon valves – it avoids material contamination in the recycling process.
You have the choice of valve types in differing rigidity grades for the different filling products such as e.g. ketchup, chocolate syrup, body lotion and pharmaceutical products with their individual viscosities. These valves provide for an even and easy taking of the product already with pressing slightly. Also products containing pieces such as e.g. in cocktail sauces are easy to dose with the BERICAPValve.
Apart from its consumer-friendly handling, the BERICAPValve scores with its superior tightness with all viscous products.
BERICAP offers a wide product range of hinged closures, into which the dosing valve BericapValve can be inserted, but in its own R & D centres BERICAP can also develop custom-made designs.


 
Illustration: closure with integrated dosing valve, dosing valve                                       


BERICAP presents the revised edible oil closure HC EV 29/21 for syrup filling

This hinged closure, which was introduced successfully into the cooking/salad oil market since several years underwent a 'face-lift'.
The glossy, high-value closure fits both for glass and for PET bottles with 29/21 neck and appears to be functional and modern.
The opening lip on the top part of the closure, which is a little larger now, allows for an easy opening of the closure, the newly designed ribbed shape above this lip is giving a modern appearance to the closure.
The functionality of the interior of this closure was revised too. A practical rip-open safety diaphragm guarantees the intactness of the bottled product. A slightly pointed pourer enables for precise, drip-free dosing, a volume control sets the flow volume of the bottled liquid.
The closure is also available with customized relief print and prints on the sides so as to increase the trademark branding.
The closure is being employed on the edible oil market and increasingly also on the syrup market.


                    
Hinged closure for syrup: HC EV29/21            Bottle sample with HC EV29/21


For further informaton please contact: martina.mussel(at)bericap.com


Closures Catalogue